The camera comes with the two software programs IC Capture and IC Measure. Its standardised C-mount port also allows the DFK 33UP1300 to be attached to measuring microscopes, test microscopes or macroscopes for photographic documentation and measurement tasks in science or for technical applications.
The field of view displayed on the camera is roughly equivalent to that of a standard widefield eyepiece with a 10x magnification factor.
This enables the camera to capture the largest possible field of view without any vignetting. Because of the half-inch sensor size, we recommend using an adjustment factor of 0.5x. In this case, the camera works as an eyepiece camera. The photo below shows the small, lightweight DFK 33UP1300 attached to a Zeiss microscope with a 30 mm eyepiece tube using an LM eyepiece tube adapter solution. We offer adapter solutions that work on phototubes as well as eyepiece tubes. Our LM digital adapters with built-in optics enable users to attach the camera to almost any microscope. Sensor Ansicht Imaging Source DFK 33U C-mount Kamera.Camera control via IC Capture and IC Measure software (included with the camera).It is small and compact, has a USB3 interface and can be connected to lenses or microscopes via the C-mount port.īelow is a summary of the key features of the DFK 33UP1300 that are important if you want to attach it to a microscope: The camera comes with a comprehensive software package which includes drivers and software tools for measurement and image acquisition. Coming in at around € 450, the Imaging Source DFK 33UP1300 industrial camera is a budget-friendly alternative to expensive microscope cameras from branded microscope manufacturers, such as Zeiss, Nikon, Olympus or Leica. USB industrial cameras are produced in large quantities and therefore carry relatively moderate price tags. Using the Imaging Source DFK 33UP1300 colour industrial camera on a microscope – with the LM microscope adapter as optical connector device
0 kommentar(er)
